We never sell your data to third parties
Dodge 125852 P2B-SC-25M two-bolt pillow block bearing with 25mm bore, 65-degree set screw locking, cast iron housing, standard duty ball bearing insert, DualGuard seals, non-expansion fixed design for general industrial applications. 25mm bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SC-25M
Contact supplier for technical support on: +1-864-284-5700
$88.93 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
205 series
Base to center height
1.4400 in, 36.576 mm
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bolt to bolt max
4.5000 in, 114.3 mm
Bolt to bolt min
3.6900 in, 93.726 mm
Bore
25mm
Bore length
1.3400 in, 34.036 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
25 mm
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max RPM
7500 rpm
Max Speed
4500 rpm
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
25.0000 mm
Standoff housing
No
Static load capacity
1769 lbf, 7868.904 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-10, TS-100
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block with cast iron construction
- Bore Diameter: 25mm (0.984")
- Locking Method: 65-degree set screw for secure shaft attachment
- Bearing Series: 205 series standard duty ball bearing
- Expansion Type: Non-expansion (fixed) design
- Sealing: DualGuard single lip seals with rubberized flingers
- Maximum Speed: 4500 RPM rated capacity
- Applications: General purpose industrial machinery, pumps, fans, conveyors
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#792186
Brand
Dodge
Model
128364
#128756
Brand
Dodge
Model
P2B-SC-25M
#125539
Brand
Dodge
Model
P2B-DL-012
#126948
Brand
Dodge
Model
P2B-VSCB-012
#125623
Brand
Dodge
Model
P2B-DLB-012
#2257333
Brand
SealMaster
Model
NP-205
#17794
Brand
AMI Bearings
Model
UCP205
| Brand | Balax |
| Model | 12045-010 |
| Brand | Gates Rubber |
| Model | 5V600 |
| Brand | Precision Twist Drill |
| Model | 5996134 |
| Brand | U.S.Tsubaki |
| Model | C2050SK2CL |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/