We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 124447 FB-SC-106 three-bolt flange bracket bearing with 1-3/8" (34.925mm) bore, 207 series ball bearing, 65-degree set screw locking, cast iron housing, DualGuard seal, non-expansion design for fixed shaft positioning. 1-3/8" bore 3-Bolt Flange Bracket Ball Bearing with Set Screw locking used in General Purpose applications
MODEL FB-SC-106
Contact supplier for technical support on: +1-864-284-5700
$140.04 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
207 series
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
2.0000 in, 50.8 mm
Bolt to bolt min
2.0000 in, 50.8 mm
Bore
1 3/8 in
Bore length
1.7100 in, 43.434 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Flanged bracket
I.D.
1 3/8 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max RPM
5500 rpm
Max Speed
3500 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Setscrew
Shaft diameter
1.3750 in
Standoff housing
No
Static load capacity
3461 lbf, 15395.295 N
Suitable for high temperature
No
Suitable for washdown
No
Type
3-bolt flange bracket
- Housing Type: Three-bolt flange bracket (FB) for surface mounting
- Bore Diameter: 1-3/8" (34.925mm)
- Locking Type: 65-degree set screw for maximum holding power
- Bearing Series: 207 series ball bearing
- Housing Material: Cast iron for standard indoor applications
- Duty Rating: Standard duty for general purpose applications
- Seal Type: DualGuard single lip seal with rubberized flinger
- Expansion Type: Non-expansion (fixed) for shaft positioning
- Max Speed: 3,500 RPM
- Applications: General machinery, conveyors, and industrial equipment where triangular bolt pattern mounting is required
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#2218137
Brand
Dodge
Model
P2B-DL-20M-HTS
#123535
Brand
Dodge
Model
P2B-SCAH-012
#125623
Brand
Dodge
Model
P2B-DLB-012
#132278
Brand
Dodge
Model
FB-SC-106
#123526
Brand
Dodge
Model
P2B-SCAH-012-HT
#2259488
Brand
SealMaster
Model
701244
#2275644
Brand
Browning
Model
764442
| Brand | Cooper Wiring |
| Model | 7729V-BOX |
| Brand | RAB Lighting |
| Model | VANLED40YFW/480/PCS4 |
| Brand | Eklind |
| Model | 63812 |
| Brand | Berkeley |
| Model | MGP10D3-02 |
| Brand | PIP |
| Model | 9072/L |
| Brand | MasterDrive |
| Model | 5/SPC475-4040 |
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/