We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 125503 P2B-VSC-015 two-bolt pillow block bearing with 15/16" bore, intermediate duty set screw locking, cast iron housing, ProGuard lip seal, 205 series ball bearing for general industrial applications. 15/16" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-VSC-015
Contact supplier for technical support on: +1-864-284-5700
$54.67 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
205 series
Base to center height
1.4400 in, 36.576 mm
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bolt to bolt max
4.5000 in, 114.3 mm
Bolt to bolt min
3.6900 in, 93.726 mm
Bore
15/16 in
Bore length
1.3400 in, 34.036 mm
Duty
Intermediate duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
15/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max RPM
7500 rpm
Max Speed
4500 rpm
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
0.9375 in
Standoff housing
No
Static load capacity
1769 lbf, 7868.904 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-10, TS-100
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block (P2B)
- Bore Diameter: 15/16" (23.812mm)
- Locking Type: 65° set screw intermediate duty (VSC)
- Housing Material: Cast iron
- Duty Rating: Intermediate duty
- Bearing Series: 205 series
- Expansion Type: Non-expansion (fixed)
- Seal Type: ProGuard lip seal
- Rolling Element: Standard duty ball bearing
- Applications: General industrial machinery, conveyor systems, pumps, and equipment requiring reliable shaft support
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#125539
Brand
Dodge
Model
P2B-DL-012
#125623
Brand
Dodge
Model
P2B-DLB-012
#125286
Brand
Dodge
Model
P2B-SXVB-012
#133980
Brand
Dodge
Model
P2B-VSC-015
#126948
Brand
Dodge
Model
P2B-VSCB-012
| Brand | Bondhus |
| Model | 38262 |
| Brand | Gates Rubber |
| Model | 4/5V1400 |
| Brand | Cleveland |
| Model | C95039 |
| Brand | Whitney Tool |
| Model | 30502 |
| Brand | ABB |
| Model | S202-C2 |
| Brand | Bondhus |
| Model | 28058 |
| Brand | MRO Supply |
| Model | D204401 |
| Brand | Greenfield Threading |
| Model | 330026 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/