We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 079237 LFT-SXV-104S light duty two-bolt flange bearing with 1-1/4" bore, eccentric collar locking, alloy housing, DualGuard seals, 207 series ball bearing, non-expansion configuration for general purpose mounting applications. 1-1/4" bore 2-Bolt Light Duty Flange Ball Bearing with Eccentric Locking locking used in General Purpose applications
MODEL LFT-SXV-104S
Contact supplier for technical support on: +1-864-284-5700
$86.69 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
207 series
Bearing type
Ball, ball
Bolt Diameter
0.4063 in
Bore
1 1/4 in
Bore length
1.5300 in, 38.862 mm
Duty
Light Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Alloy
Housing option
Cast iron
Housing type
Two-bolt flange (light duty)
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Lubrication type
Grease
Max Speed
3500 RPM
Relubrication
Yes
Seal option
DualGuard seals with flingers
Seal type
Single-lip contact
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft diameter
1.2500 in
Standoff housing
No
Static load capacity
3461 lbf, 15395.295 N
Suitable for high temperature
No
Suitable for washdown
No
Type
2-bolt light duty flange
- Housing Type: Light duty two-bolt flange (LFT) for surface mounting applications
- Bore Diameter: 1-1/4" (31.75mm) with 207 series bearing
- Locking Mechanism: Eccentric collar (SXV) - quarter-turn collar locks in direction of rotation
- Housing Material: Alloy construction for general purpose applications
- Duty Rating: Light duty for moderate load applications
- Seal Protection: DualGuard seals with flingers for contamination resistance
- Configuration: Non-expansion (fixed) bearing for shaft positioning
- Maximum Speed: 3500 RPM operational limit
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#126948
Brand
Dodge
Model
P2B-VSCB-012
#5785450
Brand
Dodge
Model
P2B-SC-20M-HT
#123535
Brand
Dodge
Model
P2B-SCAH-012
#123363
Brand
Dodge
Model
P2B-SC-012
#6423543
Brand
Dodge
Model
056744
| Brand | MROSupply Fasteners |
| Model | FSTPCK-349013 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-W59612 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-349012 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-586479 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-586347 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-P72128 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-771258 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/