Image for Illustration purposes only. Actual product may vary
CEM3311T 7.5HP, 1770RPM, 3PH, 60HZ, 213TC, 3733M, OPSB
MODEL CEM3311T
Contact supplier for technical support on: 323 724 6771
$1,826.13 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient Temperature
40 °C
Base Indicator
Rigid
Conduit Box Material
Steel
Design Code
A
Duty Rating
CONT
Enclosure
OPSB
Frame
213TC
Frame Material
Steel
HP
7.5
Hz
60
Insulation Class
F
Inverter Code
Inverter Ready
Motor Standards
NEMA
Motor Weight
118
Mounting Arrangement
F1
Number of Poles
4
Overall Length
17.07 in
Phase
3
Power Factor
79
Pulley Face Code
C-FACE
RPM
1700 - 1800
Service Factor
1.15
Shaft Diameter
1.375IN
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
1800
Voltage
230/460
| Output | 7. 5 |
|---|---|
| RPM | 1770 |
| Pallet Quantity | 0 |
| Specification Number | 37B102S520G1 |
| Frame | 213TC |
| Weight | 118. 000 LB |
| Multiplier | L1 |
| Enclosure | OPSB |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 208-230/460 |
| Poles | 04 |
| Class | STOCK |
| Type | 3733M |
| Status | Active |
| Commodity Code | 8501. 52. 4000 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | A |
|---|---|
| Status | PRD/A |
| Change # | 783713 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 3733M |
| Elec. Spec | 37WGS520 |
| CD Diagram | CD0005 |
| Enclosure | OPSB |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 37B102 |
| Layout | 37LYB102 |
| Frame | 213TC |
| Mounting | F1 |
| Poles | 04 |
| Created Date | 7/30/2010 |
| Base | RG |
| Rotation | R |
| Insulation | F |
| Eff. Date | 2/5/2013 |
| Leads | 9#14 |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for CEM3311T
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 37B102S520G1 | BALDOR/FT SMITH/REC WHSE #5 | 7/30/2010 | 33M 4P OPSB HOR 213TC SUPER E |
| Nameplate No. | NP1259L |
|---|---|
| CAT. NO. | CEM3311T |
| SPEC. | 37B102S520G1 |
| HP | 7. 5 |
| VOLTS | 208-230/460 |
| AMP | 20. 4-19. 4/9. 7 |
| RPM | 1770 |
| FRAME | 213TC |
| HZ | 60 |
| PH | 3 |
| SER. F. | 1. 15 |
| CODE | J |
| DES | A |
| CL | F |
| NEMA-NOM-EFF | 91 |
| PF | 79 |
| RATING | 40C AMB-CONT |
| CC | 010A |
| USABLE AT 208V | |
| DE | 6307 |
| ODE | 6206 |
| ENCL | OPSB |
| SN | |
General Characteristics
| Full Load Torque | 22. 17 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 4. 67 Amps |
| Break-Down Torque | 67. 8 LB-FT |
| Line-line Res. @ 25°C. | 1. 5572 Ohms A Ph / 0 Ohms B Ph |
| Pull-Up Torque | 31. 6 LB-FT |
| Temp. Rise @ Rated Load | 35°C |
| Locked-Rotor Torque | 40 LB-FT |
| Temp. Rise @ S. F. Load | 43°C |
| Starting Current | 68. 2 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 40 | 62 | 73 | 79 | 82 | 83 | 81 |
| Efficiency | 85. 6 | 90. 5 | 91. 4 | 91. 2 | 90. 4 | 89. 1 | 90. 7 |
| Speed (RPM) | 1792. 9 | 1786. 8 | 1778. 7 | 1771. 9 | 1762. 9 | 1751. 6 | 1766 |
| Line Amperes | 5. 16 | 6. 29 | 7. 88 | 9. 72 | 11. 8 | 14. 2 | 11 |
Parts for current product
| Product Number | Description | Quantity | |
|---|---|---|---|
| SA200637 | SA 37B102S520G1 | 1 EA | |
| RA187948 | RA 37B102S520G1 | 1 EA | |
| S/P107-000-001 | SUPER E PROC'S-FS & WS PLTS-POLYREX EM G | 1 EA | |
| HA6361A01 | LIFTING LUG FOR 37, 39 & 40 FRAME (AUTOP | 2 EA | |
| 37CB3006 | 37 CB CASTING W/1. 38 LEAD HOLE @ 6: 00 | 1 EA | |
| 51XW2520A10 | . 25-20 X. 62, TAPTITE II, HEX WSHR SLTD | 2 EA | |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA | |
| 37EP3200A01SP | FR ENDPLATE, 37L&M, OPEN, MACH, W/GREASE | 1 EA | |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA | |
| HW5100A06 | W2420-025 WVY WSHR (WB) | 1 EA | |
| 37EP3400A01 | FACE MT EP-OPEN-307 BRG-213-215TC W/GREA | 1 EA | |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA | |
| 10XN2520A30 | HEX HD CAP SCREW-STD THD-. 25 X 20 THD PE | 4 EA | |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT. 493 OD, . 255 I | 4 EA | |
| XY3118A12 | 5/16-18 HEX NUT DIRECTIONAL SERRATION | 4 EA | |
| 37CB4516 | LIPPED LID FOR 37 FRAME NEC KOBX | 1 EA | |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 4 EA | |
| HW2501F21 | KEY, 5/16 SQ X 2. 375 | 1 EA | |
| HA7000A02 | KEY RETAINER RING, 1 1/8 DIA, 1 3/8 DIA | 1 EA | |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA | |
| LB1115 | LABEL, LIFTING DEVICE | 1 EA | |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB | |
| 37AD2001A01 | BAFFLE PLATE, STAMPED | 2 EA | |
| MG1000Y03 | WILKO 689. 710 GOLD PAINT SUPER E | 0. 028 GA | |
| HA3104A39 | THRUBOLT-5/16-18 X 12. 250 | 4 EA | |
| LC0005E01 | CONN. DIA. /WARNING LABEL (LC0005/LB1119) | 1 EA | |
| LB1125C02 | SUPER-E (STOCK CTN LABEL SUPER-E WITH FL | 1 EA | |
| NP1259L | ALUM SUPER-E UL CSA-EEV CC NEMA PREMIUM | 1 EA | |
| 36PA1001 | PACKAGING GROUP | 1 EA | |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
SKU: 25590
2 hp motors
This order came in without any issues. The price on this order was very competitive.
Read moreSKU: 24596
Great service
Flawless from start to finish. Got my motor at the best price and delivered on time. I will definitely use this company again.
Read moreSKU: 24486
Happy customer
Our customer only wanted to purchase this particular motors. I was pleased once again to not only find them in stock, but at the cheapest cost to resale.
Read moreSKU: 27348
Baldor ga16 pedestal
As specified. Prompt delivery of two pedestals. No problems. Excellent in every regard.
Read more| Brand | Eklind |
| Model | 64970 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-534510 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-489148 |
| Brand | IPTCI Bearing |
| Model | CUCTFB 205 16 |
| Brand | JW Winco |
| Model | 903-18-M8-35-ST |
| Brand | Enerpac |
| Model | SDA250-36 |
| Brand | Bando |
| Model | TL144-S8M-40 |
| Brand | SKF Seals |
| Model | 99050 |
SKU: 25590
2 hp motors
This order came in without any issues. The price on this order was very competitive.
Read moreSKU: 24596
Great service
Flawless from start to finish. Got my motor at the best price and delivered on time. I will definitely use this company again.
Read moreSKU: 24486
Happy customer
Our customer only wanted to purchase this particular motors. I was pleased once again to not only find them in stock, but at the cheapest cost to resale.
Read moreSKU: 27348
Baldor ga16 pedestal
As specified. Prompt delivery of two pedestals. No problems. Excellent in every regard.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/