We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 123830 P2B-SC-008 two-bolt pillow block bearing with 1/2" bore (12.7mm), 65 degree set screw locking, standard duty ball bearing insert, cast iron housing, non-expansion (fixed), DualGuard seals, 203 series. 1/8" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SC-008
Contact supplier for technical support on: +1-864-284-5700
$77.80 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
203 series
Base to center height
1.0600 in, 26.924 mm
Bearing type
Ball, ball
Bolt centerline range
3 1/4 inch-4 1/16 inch
Bolt Diameter
0.3750 in
Bolt to bolt max
4.0600 in, 103.124 mm
Bolt to bolt min
3.2500 in, 82.55 mm
Bore
1/8 in
Bore length
1.0000 in, 25.4 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1/2 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max RPM
7500 rpm
Max Speed
5000 rpm
Measure system
Imperial
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft centerline height
1 1/16 inch
Shaft diameter
0.5000 in
Standoff housing
No
Static load capacity
1079 lbf, 4799.631 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-10
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block, cast iron construction
- Bore Diameter: 1/2" (12.7mm) exact
- Locking Mechanism: 65 degree set screw for maximum shaft grip
- Bearing Series: 203 series ball bearing insert
- Duty Rating: Standard duty for general industrial applications
- Expansion Type: Non-expansion (fixed) - locks shaft axially
- Sealing: DualGuard seal with rubberized flinger
- Applications: General purpose industrial equipment, conveyors, pumps, fans
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
#123526
Brand
Dodge
Model
P2B-SCAH-012-HT
#131697
Brand
Dodge
Model
P2B-SC-008
#125539
Brand
Dodge
Model
P2B-DL-012
#125286
Brand
Dodge
Model
P2B-SXVB-012
#125623
Brand
Dodge
Model
P2B-DLB-012
#2255704
Brand
SealMaster
Model
700172
#2255727
Brand
SealMaster
Model
700564
#17907
Brand
AMI Bearings
Model
UCLP201-8
| Brand | Link-Belt |
| Model | 10439434 |
| Brand | PT Coupling |
| Model | 930005 |
| Brand | Bando |
| Model | BB96 |
| Brand | Cleveland |
| Model | C80961 |
| Brand | Airmaster |
| Model | 06892 |
| Brand | ABB |
| Model | F362-63-0.03 |
| Brand | Airmaster |
| Model | 94423 |
| Brand | Rexnord |
| Model | A60-AA |
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/