We never sell your data to third parties
Dodge 128860 FC-DLM-112 piloted flange bearing with 1-3/4" bore (44.45mm), D-Lok concentric clamp collar locking, medium duty cast iron housing, 210 series ball bearing insert, DualGuard seal, non-expansion fixed design. 1-3/4" bore 4-Bolt Piloted Flange Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL FC-DLM-112
Contact supplier for technical support on: +1-864-284-5700
$232.13 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
210 series
Bearing type
Ball, ball
Bolt circle
5.1300 in, 130.302 mm
Bolt Diameter
0.5000 in
Bolt to bolt max
5.1300 in, 130.302 mm
Bolt to bolt min
5.1300 in, 130.302 mm
Bore
1 3/4 in
Bore length
2.0100 in, 51.054 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Piloted flange
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Max Speed
4500 rpm
Pilot depth
0.4700 in, 11.938 mm
Pilot diameter
4.2500 in, 107.95 mm
Relubrication
Yes
Rolling element
Medium duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft diameter
1.7500 in
Standoff housing
No
Static load capacity
5213 lbf, 23188.579 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt piloted flange
- Housing Type: Piloted flange (FC) with round piloted back side for precise mounting
- Bore Diameter: 1-3/4" (44.45mm) with 210 series ball bearing insert
- Locking Mechanism: D-Lok concentric clamp collar with single Allen wrench tightening
- Duty Rating: Medium duty (DLM) for higher loads than normal duty applications
- Housing Material: Cast iron construction for durability and strength
- Seal Protection: DualGuard single lip seal with rubberized flinger
- Mounting Configuration: Non-expansion (fixed) design for shaft positioning applications
- Applications: Industrial equipment requiring precise concentric mounting without shaft marring
SKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#5905001
Brand
Dodge
Model
268860CW
#123526
Brand
Dodge
Model
P2B-SCAH-012-HT
#125539
Brand
Dodge
Model
P2B-DL-012
#132449
Brand
Dodge
Model
FC-DLM-112
#2218137
Brand
Dodge
Model
P2B-DL-20M-HTS
#2253885
Brand
SealMaster
Model
705632
#2275669
Brand
Browning
Model
766073
#1387925
Brand
AMI Bearings
Model
UEFCSX09-28
| Brand | SolaHD |
| Model | SDP2-24-100T |
| Brand | Airmaster |
| Model | 24211 |
SKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/