We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 137446 TB-SCFS-102-SHFS tapped-base pillow block bearing with 1-1/8" bore (28.575mm). Stainless steel housing, set screw locking, standard duty, 206 series ball bearing. Non-expansion design with DualGuard seals. 1-1/8" bore Tap Based Ball Bearing with Set Screw locking used in General Purpose applications
MODEL TB-SCFS-102-SHFS
Contact supplier for technical support on: +1-864-284-5700
$291.06 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
206 series
Base to center height
1.6900 in, 42.926 mm
Bearing type
Ball, ball
Bolt Diameter
0.4375 in
Bolt to bolt max
3.0000 in, 76.2 mm
Bolt to bolt min
3.0000 in, 76.2 mm
Bore
1 1/8 in
Bore length
1.5200 in, 38.608 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
No
High temp
No
Housing construction
Solid
Housing material
Stainless steel
Housing option
Stainless steel
Housing type
Tapped-base pillow block
Insert material
Plated stainless steel
Insert option
Plated stainless steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max Speed
675 RPM
Relubrication
Yes
Seal option
DualGuard seals with flingers
Seal type
Triple-lip contact
Shaft attachment
Setscrew
Shaft diameter
1.1250 in
Standoff housing
No
Static load capacity
2538 lbf, 11289.586 N
Suitable for high temperature
No
Suitable for washdown
Yes
Type
Tap based
- Housing Type: Tapped-base pillow block with threaded mounting holes
- Bore Size: 1-1/8" (28.575mm) - 206 series ball bearing
- Locking Type: 65 degree set screw locking mechanism
- Housing Material: Stainless steel construction for corrosion resistance
- Duty Rating: Standard duty for general purpose applications
- Configuration: Non-expansion (fixed) bearing locates shaft position
- Sealing: DualGuard single lip seal with rubberized flingers
- Maximum Speed: 675 RPM operating limit
- Static Load Rating: 2,538 lbf (11,290 N)
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#2218137
Brand
Dodge
Model
P2B-DL-20M-HTS
#123526
Brand
Dodge
Model
P2B-SCAH-012-HT
#126948
Brand
Dodge
Model
P2B-VSCB-012
#125539
Brand
Dodge
Model
P2B-DL-012
#125623
Brand
Dodge
Model
P2B-DLB-012
| Brand | Lubriplate |
| Model | L0930-060 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-602333 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/