Categories

Subtotal

View cart
Add products to your shopping cart
#1798561

Image for Illustration purposes only. Actual product may vary

  • BRAND:
  • SKU: 1798561
  • CONDITION: NEW
  • MODEL: 68514426083

SAGA 26 CPLG 1-1/2X1-1/2 RSB

$907.83 Each

NEW

  • Free shipping on orders over $20
  • Typically ships in: 1 day
  • Weight: 49.0 lb

Select Quantity

Additional Description

    Saga is a general purpose, torsionally soft coupling with high tolerance to all forms of misalignment. The design features hexagonal or octagonal rubber donut-shaped elements with metal inserts positioned at each apex during the vulcanization process. These metal inserts carry actual bolts which fix the element to tines on cast, cylindrical hubs. Embedded inserts also have tines which connect with mating surfaces on hubs so that axial bolts can be easily torqued during assembly without twisting the rubber beyond the limits of its elasticity. The rubber between each apex is pre-compressed, so it is much more durable to the stresses arising from the various forms of misalignment and torsional vibrations.
    Note: A complete Saga coupling is comprised of 2 hubs, an elastomeric donut, and hardware.
Specifications
Description SAGA 26 CPLG 1-1/2X1-1/2 RSB
TypeTorsional
MaterialSteel
Weight49.00 lb
Complete Coupling Weight46.00 lb
StyleFlexible
ColorGray/Metallic
Bore TypeRough Stock Bore
Connection Type A x B 1 1/2 x 1 1/2 in
# of Bolts6
Coupling TypeTorsional
Element MaterialNatural Rubber
Dimensional Data
Rough Stock Bore1 1/2 in
Max. Bore (Dimensions ID1/ID2)2.875 in
CouplingS26
Set Screw Thread Size (Dimension T)No Setscrew
Length thru Bore3.380 in
Outside Diameter8.630 in
Overall Length9.880 in
Dimension BC6.200 in157.48 mm
Dimension HD4.590 in
Dimension L2.250 in57.15 mm
Bolt Size3/4-10 x 4
Cubic inches735.83177 in³
Performance Data
Operating Temperature Range-60 to 200 ºF
Rated Torque for 1.0 SF5000.00 in·lb
Rated Torque for 1.0 Service Factor5000.00 in·lb
Recommended Torque (Wet)200.00 ft·lb
Recommended Torque (Dry)260.00 ft·lb
Max. Shock Load15000.00 in·lb
Max. Speed4000 rpm
Dynamic Torsional Stiffness590.00 in·lb/deg33805.00 in·lb/rad
Specific Torsional Stiffness6.76 in·lb/rad
Moment of Inertia WR2234.000 lb·in²
Rated HP at 100 rpm for 1.0 Service Factor7.93 hp
Bolt Grade# 5
Coupling Design
    Saga is a general purpose, torsionally soft coupling with high tolerance to all forms of misalignment. The design features hexagonal or octagonal rubber donut-shaped elements with metal inserts positioned at each apex during the vulcanization process. These metal inserts carry actual bolts which fix the element to tines on cast, cylindrical hubs. Embedded inserts also have tines which connect with mating surfaces on hubs so that axial bolts can be easily torqued during assembly without twisting the rubber beyond the limits of its elasticity. The rubber between each apex is precompressed, so it is much more durable to the stresses arising from the various forms of misalignment and torsional vibrations. While the Saga coupling is normally associated with shaft-to-shaft applications, adaptations for flange and flywheel mountings can be made. In addition, a floating shaft version for use in lieu of a universal joint drive shaft with separate torsional coupling is available. Its elements can also be stacked in series for use in applications with extreme transient or permanent parallel misalignment, or where torsional dynamics demand an extremely soft element for proper damping and/or vibratory decoupling. The rubber’s stiffness of 60 as measured against Shore A by durometer, covers the majority of such situations.
Features
  • No end thrust in misalignment position
  • Absorbs misalignment and shock
  • No axial reaction force to damage or accelerate wear in system bearings
  • Accepts constant angular misalignment of up to 3°
  • Parallel tolerance of 0.060 (1.5mm), while reaction force remains low
  • Lateral softness without complication, or sacrifice of performance or durability
  • Natural rubber can operate in temperatures from -60° to 200° F (-51° to 93° C)
Notes
  • For applications requiring simultaneous angular and parallel misalignment, consult Lovejoy Engineering to ensure that heat generated from all three forms of stress do not exceed the coupling’s ability to dissipate heat.
  • For higher speeds, balancing may be necessary.
  • Standard bores available by 1/16 inch increments.
  • Some metric sizes also available as standard.

Specifications:

OD 8.630 in

Return policy

Item must be unused.

Item must be in it's original package.

Restocking, shipping and handling fees may applied to any return with this manufacturer.

For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/

 

Product's availability

State of California Proposition 65 Product Warning