We never sell your data to third parties
Leeson 096001.00 0.08 HP, 9 RPM single-phase AC gearmotor with L42Y NEMA frame and Totally Enclosed Non-Ventilated (TENV) enclosure. Operates on 110V at 60/50 Hz with Class F insulation. Features 0.750" shaft diameter, 1.625" shaft length, and ball bearings (6203 drive end, 6201 opposite drive end). Designed for low-speed continuous-duty applications.
MODEL 096001.00
$764.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Current
1.3/0.65
Drive End Bearing Size
6203
Drive End Bearing Type
Ball
Duty
Continuous
Enclosure
TENV
Frame
L42Y
Frame Length
5.5
Frequency
60/50
Height
10.88
HP
0.08
Insulation Class
F
KVA code
G
KW
0.06
Length
14.44
Opp. Drive End Bearing Size
6201
Opp. Drive End Bearing Type
Ball
Phase
1
RPM
9
Service factor
1
Shaft Diameter
0.750
Shaft Length
1.625
Shaft type
Parallel
Thermal protection
No Protection
UL
Recognized
Voltage
110
Width
10.44
Regal Beloit Leeson&Reg; 096001.00
UPC: 691720000779 | UNSPSC: 20101617 | GTIN:
Gear Reducers & Gearmotors > Gearmotors > Offset Parallel Shaft Gearmotors > Helical Offset Gearmotors
LEESON® Gear Motor, Parallel Shaft Continuous Duty, Series: PE350, 115/230 VAC, 1.6/0.8 A Full Load Amperage, 0.08 hp, 60 Hz, 1, 9 rpm Maximum, 3/4 in Shaft Dia, 1-5/8 in Shaft Length, Reversible, 341 in-lb, 180:1 Gear Ratio, Permanent Split Capacitor Motor, Ball Bearing, 491 lb Overhung Load, Special Mount, 40 deg C Ambient, Class F Insulation, Totally Enclosed Nonvented (TENV), Die Cast Aluminum Housing, 11.36 in L x 5.57 in H
Features:
- Rugged die cast aluminum gear housing for maximum gear and bearing support
- Precision machined gearing and hardened for maximum load capability
- All gearing designed and rated to AGMA class 9 standards and to withstand momentary shock overload of 200%
- Oversized output bearings for greater overhung load capacity and long life
- High carbon alloy output shaft provides maximum strength and rigidity
- All needle bearing journals are precision ground after heat treating to provide maximum fit and finish
- Heavy duty industrial oil seals keep lubricant in and dirt out
- Gears and bearings are splash lubricated with permanent, heavy duty gear oil
- Run capacitor supplied at no additional cost for single phase designs
- Overhung load capacities shown are at center of output shaft
- These gear motors are designed for mounting at any angle
Specs:
- Series: PE350
- Type: Parallel Shaft Continuous Duty
- Maximum Speed: 9 rpm
- Dimensions: 11.36 in L x 5.57 in H
- Shaft Length: 1-5/8 in
- Voltage Rating: 115/230 VAC
- Mounting Type: Special
- Insulation Type: Class F
- Motor Type: Permanent Split Capacitor
- Rotation Type: Reversible
- Housing Material: Die Cast Aluminum
- Frequency Rating: 60 Hz
- Enclosure Type: Totally Enclosed Nonvented (TENV)
- Temperature Rating: 40 deg C Ambient
- Gear Ratio: 180:1
- Bearing Type: Ball
- Horsepower: 0.08 hp
- Shaft Diameter: 3/4 in
- Phase: 1
- Torque Rating: 341 in-lb
- Full Load Amperage: 1.6/0.8 A
- Overhung Load: 491 lb
Certifications/Standards:
AGMA Class 9 | CSA Certified | UL Listed
Warranty:
1 Year
SKU: 2525011
Product fine shipping not so much
The Leeson motor was fine and worked as it should. The shipping however had alot to be desired. I know the product was coming from the Allentown warehouse which is about a 35 min drive but still took 4 days to get here and when it arrived the box was trashed. I know this is not your fault and is more of a FedEx issue but something to be aware of.
Read moreSKU: 2525884
Leeson 3hp motor
I have not tested the motor yet but on the past I bought another and it was a very good experience , for sure this is going to be the same
Read more
#221441
Brand
Leeson
Model
096050.00
#221437
Brand
Leeson
Model
096014.00
#221444
Brand
Leeson
Model
096065.00
#221445
Brand
Leeson
Model
096066.00
#221446
Brand
Leeson
Model
096067.00
#221447
Brand
Leeson
Model
096068.00
| Brand | Champion |
| Model | 302-7/16-14-B |
| Brand | PT Coupling |
| Model | 5002560A |
| Brand | PEER Bearing |
| Model | 6307-ZZD-C3 |
SKU: 2525011
Product fine shipping not so much
The Leeson motor was fine and worked as it should. The shipping however had alot to be desired. I know the product was coming from the Allentown warehouse which is about a 35 min drive but still took 4 days to get here and when it arrived the box was trashed. I know this is not your fault and is more of a FedEx issue but something to be aware of.
Read moreSKU: 2525884
Leeson 3hp motor
I have not tested the motor yet but on the past I bought another and it was a very good experience , for sure this is going to be the same
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/