Pneumatics Page 12 - MROSupply.com

#104970

Dixon 48951111 Legris uni-directional check valve with 1/8" Female NPT threads, stainless steel body, and FKM seal. Designed for reliable flow control in industrial fluid systems.

Brand	Dixon
Model	48951111

$146.29 Each

Free Shipping orders over $100

#105066

Dixon 50040064 Model 50 bi-metal back connected thermometer with 5" face and 4" stem. 1/2" Male NPT connection for industrial temperature measurement. Bi-metal coil sensing element provides accurate readings across a wide temperature range. Durable construction suitable for process and HVAC applications.

Brand	Dixon
Model	50040064

$109.69 Each

Free Shipping orders over $100

#105307

Dixon 61-109 ball cone check valve with female NPT threads on both ends and brass body. Provides reliable backflow prevention in industrial fluid handling systems.

Brand	Dixon
Model	61-109

$719.57 Each

Free Shipping orders over $100

#107781

Dixon BFC1200 Series-F flow control valve with 3/4" Female NPT threads and brass construction. Designed for precise flow regulation in industrial hose systems.

Brand	Dixon
Model	BFC1200

$260.33 Each

Free Shipping orders over $100

#109472

Dixon F26-04M F-Series quick coupling with 1/4" NPT threads, brass construction. Designed for pneumatic and industrial air applications, this coupling provides reliable performance and easy connection.

Brand	Dixon
Model	F26-04M

$149.47 Each

Free Shipping orders over $100

#109481

Dixon F30-08AMB F-Series quick coupling with 1" body size and brass construction. Designed for pneumatic and industrial air applications, this coupling provides reliable performance and easy connection. The F-Series is known for its durability and interchangeability.

Brand	Dixon
Model	F30-08AMB

$364.64 Each

Free Shipping orders over $100

#109579

Dixon F74G-6A-MB F-Series quick coupling with 3/8 in body size and brass construction. Designed for pneumatic and industrial air applications, this coupling provides reliable performance and easy connection.

Brand	Dixon
Model	F74G-6A-MB

$178.92 Each

Free Shipping orders over $100

#110759

Dixon GPA-95-969 modular sleeve with T bracket for Wilkerson FRL units. Provides secure mounting in pneumatic systems. Durable construction for reliable performance.

Brand	Dixon
Model	GPA-95-969

$35.13 Each

Free shipping

#110770

Dixon GRP-95-182 Wilkerson manual petcock filter drain hose fitting for compressed air systems. Provides reliable drainage of moisture and contaminants from filter bowls. Durable construction ensures long service life in industrial pneumatic applications.

Brand	Dixon
Model	GRP-95-182

$30.87 Each

Free shipping

#111796

Dixon M16-04A Wilkerson M16-Series compact coalescing filter with 1/2" NPT ports and 5 micron filtration. Designed for compressed air systems to remove oil, water, and particulates. Aluminum bowl with manual drain. Max pressure 150 PSI.

Brand	Dixon
Model	M16-04A

$252.68 Each

Free Shipping orders over $100

#111799

Dixon M26-02M coalescing filter with manual drain, 1/4" NPT, for compressed air systems. Removes oil, water, and particulates. Compact aluminum body with reliable manual drain valve for efficient moisture removal.

Brand	Dixon
Model	M26-02M

$161.81 Each

Free Shipping orders over $100

#112482

Dixon R07-200RG R07-Series miniature regulator with gauge, 1/4" NPT port size and 0-125 PSI adjustable pressure range. Compact design with integrated gauge for easy pressure monitoring. Suitable for FRL assemblies and general pneumatic systems.

Brand	Dixon
Model	R07-200RG

$53.51 Each

Free shipping

#112507

Dixon R119-06CG R119-Series high-flow regulator with gauge for compressed air systems, 3/4" NPT port size, aluminum body. Provides precise pressure control and consistent air flow regulation in industrial pneumatic applications. Durable and corrosion-resistant construction.

Brand	Dixon
Model	R119-06CG

$213.80 Each

Free Shipping orders over $100

#112510

Dixon R119-12C R119-Series high-flow regulator for compressed air systems, 1/2" NPT port size, aluminum body. Supplied without gauge for custom selection. Suitable for industrial applications requiring precise pressure control.

Brand	Dixon
Model	R119-12C

$252.37 Each

Free Shipping orders over $100

#112606

Dixon R30-06R Wilkerson R30-Series high flow regulator for pneumatic FRL systems. Features 3/4" NPT ports and a high flow capacity for industrial air preparation. Constructed with a zinc body and polycarbonate bowl for durability and visibility.

Brand	Dixon
Model	R30-06R

$231.12 Each

Free Shipping orders over $100

#112634

Dixon R40-0BR Wilkerson R40-Series high flow regulator with 1/4" NPT port and aluminum body for precise pneumatic pressure control. Designed for industrial applications requiring consistent air pressure regulation and reliable performance.

Brand	Dixon
Model	R40-0BR

$439.24 Each

Free Shipping orders over $100

#112635

Dixon R40-0BRG Wilkerson R40-Series high flow regulator hose fitting for industrial pneumatic systems. Provides precise pressure control and reliable performance in demanding applications.

Brand	Dixon
Model	R40-0BRG

$453.21 Each

Free Shipping orders over $100

#112639

Dixon R40-0CRG Wilkerson R40-Series high flow regulator with 1/4" NPT ports and aluminum body for compressed air systems. Provides reliable pressure regulation in industrial pneumatic applications.

Brand	Dixon
Model	R40-0CRG

$453.21 Each

Free Shipping orders over $100

#112673

Dixon R72G-2R R72-Series sub-compact regulator without gauge, 1/4" NPT port size. Designed for pneumatic systems, this regulator provides precise pressure control in a compact form factor suitable for industrial applications.

Brand	Dixon
Model	R72G-2R

$64.78 Each

Free shipping

#113390

Dixon SCVH16 safety check valve, 1/2" NPT brass hose fitting for flow control and safety shut-off. Durable brass construction provides corrosion resistance in industrial applications.

Brand	Dixon
Model	SCVH16

$485.04 Each

Free Shipping orders over $100

#113393

Dixon SCVH8 brass safety check valve with 3/4" NPT connections for reliable backflow prevention in industrial and commercial hose applications. Durable brass construction ensures long service life and resistance to corrosion.

Brand	Dixon
Model	SCVH8

$102.52 Each

Free Shipping orders over $100

#113406

Dixon SCVM4 brass safety check valve for backflow prevention in industrial fluid handling. Brass construction provides corrosion resistance and durability in demanding applications.

Brand	Dixon
Model	SCVM4

$66.09 Each

Free shipping

#114127

Dixon SWCV150 horizontal swing check valve, 1-1/2 inch size, brass construction. Designed for reliable backflow prevention in industrial hose and piping systems. Suitable for water, oil, and compatible fluids where reverse flow must be stopped.

Brand	Dixon
Model	SWCV150

$59.68 Each

Free shipping

#1154196

Dixon DSCV200 domestic swing check valve, 2-inch size, brass construction. Designed for reliable backflow prevention in industrial hose and piping systems, this valve provides durable performance in demanding applications.

Brand	Dixon
Model	DSCV200

$648.32 Each

Free Shipping orders over $100

#1154373

Dixon SFC2400 Series-F flow control valve with 1-1/2" thread size. Constructed from black oxide steel for durability in industrial hose systems. Designed for precise flow regulation in pneumatic and hydraulic applications.

Brand	Dixon
Model	SFC2400

$1,625.17 Each

Free Shipping orders over $100

#1756292

Boston Gear 30242924 E25-04DX1-1010 disposable cylinder with 7/16" bore and 1" stroke. Pneumatic power transmission component for general industrial applications.

Brand	Boston Gear
Model	E25-04DX1-1010

$134.71 Each

Free Shipping orders over $100

#1756677

Boston Gear 30242467 E324 needle valve with 1/2 NPT connection for flow control in industrial fluid systems.

Brand	Boston Gear
Model	30242467

$259.47 Each

Free Shipping orders over $100

#1756679

Boston Gear 30242469 E331 check valve with 1/8 inch NPT connection. Brass construction provides corrosion resistance for one-way flow control in pneumatic or hydraulic systems.

Brand	Boston Gear
Model	30242469

$79.13 Each

Free shipping

#1756780

Boston Gear 30242643 E632 muffler-speed control regulates exhaust flow and reduces noise in pneumatic systems. Lightweight 0.091 lb design for air-operated equipment.

Brand	Boston Gear
Model	30242643

$55.36 Each

Free shipping

#1756787

Boston Gear 30242650 E643 breather vent with 3/8 NPT thread. Designed for gearboxes and power transmission components to allow pressure equalization while preventing contamination ingress.

Brand	Boston Gear
Model	30242650

$26.48 Each

Free shipping

#1756977

Boston Gear 30244466 73955 EN41481-MG JBO FLT A/D 1-1/2 M/SG open gear for general industrial drive applications. Designed for power transmission in machinery requiring reliable gearing components.

Brand	Boston Gear
Model	30244466

$1,109.52 Each

Free Shipping orders over $100

#1757070

Boston Gear 30244476 EN45450-MG Jumbo FRL combination unit for compressed air systems. 3/4-inch NPT ports provide filtration, pressure regulation, and lubrication in a single assembly. Designed for industrial pneumatic applications requiring clean, regulated, and lubricated air supply.

Brand	Boston Gear
Model	30244476

$2,155.53 Each

Free Shipping orders over $100

#1757392

Boston Gear 30242480 J3330 check valve with 3/8 inch NPT female connections. Constructed for use in pneumatic and hydraulic power transmission systems where unidirectional flow control is required.

Brand	Boston Gear
Model	30242480

$131.84 Each

Free Shipping orders over $100

#1908699

SKF / CR Seals 620502 radial shaft oil seal for industrial rotating equipment. Prevents lubricant leakage and contaminant ingress in motors, gearboxes, and pumps. Engineered for reliable performance in demanding applications.

Brand	SKF Seals
Model	620502

$651.46 Each

Free Shipping orders over $100

#2070839

Dixon BL-RK122 repair kit for bulk delivery Super Ball nozzles. Includes replacement components for maintaining Dixon Super Ball Nozzles used in bulk delivery applications. Constructed from durable materials for reliable performance.

Brand	Dixon
Model	BL-RK122

$49.71 Each

Free shipping

#2230250

Guardair 76S018 Booster Air Gun with 18 Inch Extension

Brand	Guardair
Model	76S018

$39.23 Each

Free shipping

#2230541

Guardair F5E024AQF 24 Inch Force 5 Aluminum Extension and Quiet Force Nozzle

Brand	Guardair
Model	F5E024AQF

$244.20 Each

Free Shipping orders over $100

#2230651

Guardair 38X25B04 3/8 Inch ID X 25 Feet Polyurethane Hose

Brand	Guardair
Model	38X25B04

$136.91 Each

Free Shipping orders over $100

#2230692

Guardair LT3000 AirSpade 3000 330 cfm with 4 Ft Barrel

Brand	Guardair
Model	LT3000

$3,001.78 Each

Free Shipping orders over $100

#2230693

Guardair HT123 150 cfm Nozzle

Brand	Guardair
Model	HT123

$531.63 Each

Free Shipping orders over $100

#2306709

Taylor Pneumatic T-7311W5 5" dual-action pneumatic sander with 10,000 RPM free speed and 5/16-24 spindle. 1/4" NPT air inlet, 8 CFM average / 18 CFM at load, 90 PSI max. 4.25 lb body with 3/8" orbit diameter for body work and panel finishing.

Brand	Taylor Pneumatic
Model	T-7311W5

$121.51 Each

Free Shipping orders over $100

#2306733

Taylor Pneumatic T-7601AH pistol grip weld flux scaler with IR style chisel and 3000 BPM for removing weld slag, flux, and spatter. 1/4" NPT air inlet, 8 CFM air consumption at load, 90 PSI max. 8.5" length and 5.7 lb weight for industrial weld cleanup and surface preparation.

Brand	Taylor Pneumatic
Model	T-7601AH

$295.46 Each

Free Shipping orders over $100

#2306772

Taylor Pneumatic T-7734L 1/2" drive heavy-duty air impact wrench with 275 ft-lb rated torque and 325 ft-lb maximum torque. Extended anvil design, 8.125" length, 5.25 lb weight. 1/4" NPT air inlet, 4 CFM average / 15 CFM at load, 90 PSI max. Built-in regulator with forward and reverse operation for production fastening and assembly work.

Brand	Taylor Pneumatic
Model	T-7734L

$151.46 Each

Free Shipping orders over $100

#2306796

Taylor Pneumatic T-7763EX 1/4" hex drive pneumatic screwdriver with 1,800 RPM free speed and externally adjustable clutch for torque control from 45 to 145 lb-ft. 1/4" NPT air inlet, 4 CFM average / 16 CFM at load, 90 PSI max. Pistol-grip design with 8.25" length and 3.1 lb weight for assembly and production fastening.

Brand	Taylor Pneumatic
Model	T-7763EX

$399.14 Each

Free Shipping orders over $100

#2306803

Taylor Pneumatic T-7767RNA600 pneumatic rivnut tool with 600 RPM free speed and double reduction gears for installing rivet nuts. 0.5 HP motor, 1/4" NPT air inlet, 90 PSI max. 7 3/8" length and 2 1/8 lb weight for production assembly work.

Brand	Taylor Pneumatic
Model	T-7767RNA600

$748.19 Each

Free Shipping orders over $100

#2306810

Taylor Pneumatic T-7772L 3/4" drive heavy-duty air impact wrench with 6" extended anvil, 650 ft-lb working torque, and 700 ft-lb maximum torque. 1/4" NPT air inlet, 2 CFM average / 24 CFM at load, 90 PSI max. Pin-type clutch with built-in regulator and forward / reverse operation.

Brand	Taylor Pneumatic
Model	T-7772L

$459.04 Each

Free Shipping orders over $100

#2306844

Taylor Pneumatic T-7826 3/8" drive stubby air ratchet wrench with 20 ft-lb maximum torque for fastening and disassembly in tight engine bays and confined workspaces. Compact stubby body design for improved access where standard-length ratchets cannot reach.

Brand	Taylor Pneumatic
Model	T-7826

$99.04 Each

Free shipping

#2306891

Taylor Pneumatic T-8839P 3/8" drive air impact wrench with 260 ft-lb rated torque and 280 ft-lb maximum torque. 1/4" NPT air inlet, 4 CFM average / 15 CFM at load, 90 PSI max. 6.5" length and 2.8 lb weight. Pin-type socket retainer with built-in regulator and forward/reverse operation.

Brand	Taylor Pneumatic
Model	T-8839P

$383.01 Each

Free Shipping orders over $100

#2306946

Taylor Pneumatic T-9901RN 1/4" collet heavy-duty low-speed die grinder with rear exhaust, 0.9 HP motor, and 3,800 RPM free speed. 1/4" NPT air inlet, 14 CFM average / 24 CFM at load, 90 PSI max. 8" length and 2.2 lb weight for industrial grinding, deburring, and finishing work.

Brand	Taylor Pneumatic
Model	T-9901RN

$221.73 Each

Free Shipping orders over $100

#2306970

Taylor Pneumatic T-#23450 7/8-24 hose swivel for T-#2, T-#3, and T-#4 chipping hammers. Allows air hose to rotate freely during use, reducing kinking and improving maneuverability in industrial chipping and demolition applications.

Brand	Taylor Pneumatic
Model	T-#23450

$42.02 Each

Free shipping

#2306971

Taylor Pneumatic T-#23451 3/8" NPT hose swivel for all chipping hammers with 3/8" NPT air inlet. Provides flexible air line connection to reduce hose kinking and improve maneuverability during chipping and demolition work.

Brand	Taylor Pneumatic
Model	T-#23451

$42.02 Each

Free shipping

#2306997

Taylor Pneumatic T-3804 cut-off wheel mandrel for mounting and driving cut-off wheels on pneumatic tools. Designed for secure wheel retention and balanced operation in industrial cutting applications.

Brand	Taylor Pneumatic
Model	T-3804

$5.73 Each

Free shipping

#2307010

Taylor Pneumatic T-4192 cold chisel with 14" length, 3/4" blade width, and .401" shank for use with Taylor Pneumatic air hammers and rivet guns. Forged steel construction for cutting, chipping, and demolition work.

Brand	Taylor Pneumatic
Model	T-4192

Call for pricing

#2307013

Taylor Pneumatic T-5030 .498 shank chisel with tapered punch profile for pneumatic rivet and air hammer applications. Designed for use with .498" shank super-duty rivet hammers, providing reliable performance in metalworking and assembly tasks.

Brand	Taylor Pneumatic
Model	T-5030

Call for pricing

#2307058

Taylor Pneumatic T-7470A 7" stiff flex rubber back-up pad with 5/8-11 female threads for angle sanders and polishers. Provides firm support for sanding discs and buffing pads in automotive, marine, and industrial finishing applications.

Brand	Taylor Pneumatic
Model	T-7470A

$36.26 Each

Free shipping

#2307071

Taylor Pneumatic 755545 5" sanding pad with PSA backing and 5/16-24 male threads for secure attachment to compatible sanders. Designed for quick abrasive changes and consistent surface contact in body work, paint prep, and finishing applications.

Brand	Taylor Pneumatic
Model	755545

$33.95 Each

Free shipping

#2307079

Taylor Pneumatic T-760326B 2" wide scraper chisel with 19/32 hex shank for heavy-duty scaling and scraping applications. Designed for use with compatible Taylor Pneumatic scaling hammers and chipping tools.

Brand	Taylor Pneumatic
Model	T-760326B

Call for pricing

#5758178

Coilhose 8808K 27 Series compressed air regulator with 1" NPT port and tamperproof adjustment. Designed for industrial pneumatic systems requiring precise pressure control with tamper-resistant settings. By Coilhose Pneumatics.

Brand	Coilhose
Model	8808K

$150.67 Each

Free Shipping orders over $100

#6104351

JET 505211 JAT-211 1" D Handle Composite Impact Wrench

Brand	JET Tools
Model	505211

$981.22 Each

Free Shipping orders over $100

#6186157

Taylor Pneumatic 772437 push-pins for the T-7724 impact wrench. Replacement push-pins for securing sockets and accessories on the T-7724 3/8" drive air impact wrench.

Brand	Taylor Pneumatic
Model	772437

$1.44 Each

Free shipping