|Description||SE-F50 FRONT MOUNT TENSIONER|
|Element Material||Natural Rubber|
|Mounting Bolt Size||M20|
|Outside Diameter (Dim D)||5.12 in130 mm|
|Overall Length (Dim E)||8.27 in210 mm|
|Idler Bolt Size||3/4 - 10 x 6|
|Dimension L||11.42 in290 mm|
|Dimension J-1||9.84 in250 mm|
|Dimension J-2||7.87 in200 mm|
|Dimension M||0.9 in23 mm|
|Dimension R||1.06 in27 mm|
|Dimension G||0.79 in20 mm|
|Dimension O||0.79 in20 mm|
|Dimension P||0.67 in17 mm|
|Dimension K||3.15 in80 mm|
|Cubic inches||483.55021 in³|
|Normal Temperature Range||-40 to 180 ºF-40 to 80 ºC|
|Force at 20° Angle of Pretension (Normal Force Level) (Dimension F)||483.3 lb2150 N|
|Distance at 20° Angle of Pretension (Normal Force Level) (Dimension S)||3.4 in86 mm|
- The recommended angle of pretension is 20°. This provides the tensioner a maximum capability to absorb vibrations and shock loads, while also maintaining a range of motion to address the system’s belt or chain stretch.
- Mounting accessories into the “Hard” Position results in approximately 25% higher tensioning force over the “normal” position.
- Inch (imperial) standard tensioner units all come with both the mounting screw and a zinc-plated idler bolt with nuts.
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may applied to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/