Image for Illustration purposes only. Actual product may vary
Baldor L1410T 5HP, 1725RPM, 1PH, 60HZ, 184T, 3640LC, OPEN, F1
MODEL L1410T
Contact supplier for technical support on: 323 724 6771
$1,108.42 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient Temperature
40 °C
Base Indicator
Rigid
Conduit Box Material
Steel
Design Code
L
Duty Rating
CONT
Enclosure
OPEN
Frame
184T
Frame Material
Steel
HP
5
Hz
60
Insulation Class
F
Inverter Code
Not Inverter
Motor Standards
NEMA
Motor Weight
81
Mounting Arrangement
F1
Number of Poles
4
Overall Length
16.49 in
Phase
1
Power Factor
95
Pulley Face Code
STANDARD
RPM
1700 - 1800
Service Factor
1.15
Shaft Diameter
1.125IN
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
1800
Voltage
230
| Output | 5 |
|---|---|
| RPM | 1725 |
| Pallet Quantity | 12 |
| Specification Number | 36M925W849G1 |
| Frame | 184T |
| Weight | 81. 000 LB |
| Multiplier | LS |
| Enclosure | OPEN |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 230 |
| Poles | 04 |
| Class | STOCK |
| Type | 3640LC |
| Status | Active |
| Commodity Code | 8501. 40. 6040 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | D |
|---|---|
| Status | PRD/A |
| Change # | 750590 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 3640LC |
| Elec. Spec | 36WGW849 |
| CD Diagram | CD0017A02 |
| Enclosure | OPEN |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 36M925 |
| Layout | 36LYM925 |
| Frame | 184T |
| Mounting | F1 |
| Poles | 04 |
| Created Date | 1/6/2010 |
| Base | RG |
| Rotation | R |
| Insulation | F |
| Eff. Date | 6/8/2012 |
| Leads | 2#10 A PH, 2#16 B PH |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for L1410T
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 36M925W849G1 | BALDOR/FT SMITH/REC WHSE #5 | 1/13/2010 | 40LC 4P OPEN HORZ 184T | |
| 36E02W849 | BALDOR/FT SMITH/REC WHSE #5 | 8/10/1999 | 40LC 4P OPEN HOR 184T | |
| 36E02W849 | BALDOR/FT SMITH/REC WHSE #5 | 6/9/1999 | 40LC 4P OPEN HOR 184T |
| Nameplate No. | NP1256L |
|---|---|
| CAT. NO. | L1410T |
| SPEC. | 36M925W849G1 |
| HP | 5 |
| VOLTS | 230 |
| AMP | 23 |
| RPM | 1725 |
| FRAME | 184T |
| HZ | 60 |
| PH | 1 |
| SER. F. | 1. 15 |
| CODE | G |
| DES | L |
| CLASS | F |
| NEMA-NOM-EFF | 82. 5 |
| PF | 87 |
| RATING | 40C AMB-CONT |
| CC | |
| USABLE AT 208V | 25 |
| DE | 6206 |
| ODE | 6205 |
| ENCL | OPEN |
| SN | |
General Characteristics
| Full Load Torque | 15 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 8. 4 Amps |
| Break-Down Torque | 34 LB-FT |
| Line-line Res. @ 25°C. | 0. 45 Ohms A Ph / 1. 56 Ohms B Ph |
| Pull-Up Torque | 28 LB-FT |
| Temp. Rise @ Rated Load | 90°C |
| Locked-Rotor Torque | 41 LB-FT |
| Temp. Rise @ S. F. Load | 110°C |
| Starting Current | 140 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 60 | 78 | 86 | 89 | 91 | 91 | 90 |
| Efficiency | 67. 2 | 79. 2 | 82. 7 | 83 | 81. 5 | 78. 5 | 82. 1 |
| Speed (RPM) | 1786 | 1772 | 1756 | 1739 | 1718 | 1691 | 1726 |
| Line Amperes | 10. 1 | 13. 2 | 17. 2 | 21. 9 | 27. 4 | 34 | 25. 2 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA035209 | SA 36F80-116 | 1 EA |
| RA031236 | RA 36F80-116 | 1 EA |
| 36CB3004 | 36 CB CASTING W/1. 09 DIA LEAD HOLE @ 6: 0 | 1 EA |
| 51XB1016A08 | 10-16X 1/2HXWSSLD SERTYB | 2 EA |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| HW3001B01 | 003SS CUP WASHER, FOR #8 SCREW | 1 EA |
| 36EP3200A01SP | FR ENDPLATE, MACH | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| 13XF0832A08 | 8-32 X. 50 PAN HD, SLTD, TYPE F SCREW, ZIN | 2 EA |
| SP1008A01 | BAFFLE, MODEL 36 & 37 | 1 EA |
| NS2501A01 | INSULATOR, CAPACITOR | 1 EA |
| 51XB1016A05 | 10-16X5/16HX WA SL SR TYB (F/S) | 2 EA |
| HW5100A05 | WVY WSHR F/205 & 304 BRGS | 1 EA |
| 36EP3201A01 | PU ENDPLATE, MACH 182-4T | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| XY2520A12 | 1/4-20 HEX NUT, DIRECTIONAL SERRATIONS | 4 EA |
| 36CB4516 | 36 LIPPED CB LID | 1 EA |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 4 EA |
| HW2501D13SP | KEY, 3/16 SQ X 1. 375 | 1 EA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| WD1000A15 | 3-520132-2 AMP FLAG (4M/RL NON-CANC/NON- | 2 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB |
| MG1000G27 | PAINT- S9282E CHARCOAL GREY | 0. 022 GA |
| EC1645A06SP | ELEC CAP, 645-774 MFD, 125V, 2. 06D X 4. | 1 EA |
| HA3101A25 | THRUBOLT 1/4-20 X 11. 000 OHIO ROD | 4 EA |
| 35CB4802A02SP | CAPACITOR COVER, STAMPED X W/AUTOPHORET | 1 EA |
| SP5061A01 | MODEL 36 TYPE L, F1, SMALL CAP CAN | 1 EA |
| LB1125C01 | STD (STOCK) CARTON LABEL BALDOR WITH FLA | 1 EA |
| LC0001A01 | CONN LABEL / WARNING LABEL (LC0001 / LB1 | 1 EA |
| NP1256L | ALUM UL CSA CC | 1 EA |
| 36PA1000 | PACK GROUP W/LB5001 | 1 EA |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
Accesories
| Product Number | Description | Multiplier |
|---|---|---|
| 36-3301 | C FACE KIT | A8 |
| 36EP1405A09SP | D-FLANGE KIT | A8 |
SKU: 25710
Exellent value, prizes
One of the best companies I have purchased equipment from. Low prices fast shipping. Best customer service.What else do I need.
Read moreSKU: 25344
Outstanding customer service & competetive pricing
The website is great and easy to navigate but when we run into $1000+ orders a simple phone call is available.
Read moreBrand
Baldor
Model
L1410TM
Brand
Baldor
Model
L1410T
Brand
Marathon Electric
Model
131537.00
Brand
Baldor
Model
L1430T
Brand
Baldor
Model
L1508T
Brand
Baldor
Model
EL1410T
| Brand | Hubbell Wiring |
| Model | HBL1386 |
| Brand | Timken |
| Model | KJLM104948-90KM3 |
| Brand | MRO Supply |
| Model | 1x6 |
| Brand | Stearns |
| Model | 52270630030F |
| Brand | Elasco |
| Model | MG1300 |
| Brand | Stearns |
| Model | 596680263 |
| Brand | Allen Bradley |
| Model | 700-HRV52TA17 |
| Brand | Precision Twist Drill |
| Model | C15L10SET |
SKU: 25710
Exellent value, prizes
One of the best companies I have purchased equipment from. Low prices fast shipping. Best customer service.What else do I need.
Read moreSKU: 25344
Outstanding customer service & competetive pricing
The website is great and easy to navigate but when we run into $1000+ orders a simple phone call is available.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/