Image for Illustration purposes only. Actual product may vary
L3514M 1.5HP, 1725RPM, 1PH, 60HZ, 56/56H, 3532LC
MODEL L3514M
Contact supplier for technical support on: 323 724 6771
$948.41 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient Temperature
40 °C
Base Indicator
Rigid
Conduit Box Material
Steel
Design Code
L
Duty Rating
CONT
Enclosure
TEFC
Frame
56/56H
Frame Material
Steel
HP
1.5
Hz
60
Insulation Class
F
Inverter Code
Not Inverter
Motor Standards
NEMA
Motor Weight
51
Mounting Arrangement
F1
Number of Poles
4
Overall Length
13.81 in
Phase
1
Power Factor
90
Pulley Face Code
STANDARD
RPM
1700 - 1800
Service Factor
1
Shaft Diameter
0.625IN
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
1800
Voltage
115/208-230
| Output | 1. 5 |
|---|---|
| RPM | 1725 |
| Pallet Quantity | 20 |
| Specification Number | 35H611W114 |
| Frame | 56/56H |
| Weight | 51. 000 LB |
| Multiplier | K |
| Enclosure | TEFC |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 115/208-230 |
| Poles | 04 |
| Class | STOCK |
| Type | 3532LC |
| Status | Active |
| Commodity Code | 8501. 40. 6040 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | AS |
|---|---|
| Status | PRD/A |
| Change # | 737998 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 3532LC |
| Elec. Spec | 35WGW114 |
| CD Diagram | CD0016A02 |
| Enclosure | TEFC |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 35H611 |
| Layout | 35LYH611 |
| Frame | 56/56H |
| Mounting | F1 |
| Poles | 04 |
| Created Date | |
| Base | RG |
| Rotation | R |
| Insulation | B |
| Eff. Date | 3/15/2012 |
| Leads | 4#16 A&J, 3#18 B PH, 1#14 #4TH |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for L3514M
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 35H611W114 | BALDOR/FT SMITH/REC WHSE #5 | 8/10/1999 | 32LC 4P TEFC HOR 56H MTO |
| Nameplate No. | NP1257L |
|---|---|
| CAT. NO. | L3514M |
| SPEC. | 35H611W114 |
| HP | 1. 5 |
| VOLTS | 115/208-230 |
| AMP | 16/7. 9-8 |
| RPM | 1725 |
| FRAME | 56/56H |
| HZ | 60 |
| PH | 1 |
| SER. F. | 1. 00 |
| CODE | J |
| DES | L |
| CL | B |
| NEMA-NOM-EFF | 75. 5 |
| PF | 80 |
| RATING | 40C AMB-CONT |
| CC | |
| USABLE AT 208V | |
| DE | 6205 |
| ODE | 6203 |
| ENCL | TEFC |
| SN | |
General Characteristics
| Full Load Torque | 4. 5 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 10. 4 Amps |
| Break-Down Torque | 14. 5 LB-FT |
| Line-line Res. @ 25°C. | 0. 354 Ohms A Ph / 1. 12 Ohms B Ph |
| Pull-Up Torque | 11. 5 LB-FT |
| Temp. Rise @ Rated Load | 76°C |
| Locked-Rotor Torque | 15 LB-FT |
| Temp. Rise @ S. F. Load | |
| Starting Current | 114 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 40 | 58 | 72 | 80 | 84 | 88 | 0 |
| Efficiency | 59. 4 | 71. 7 | 76. 2 | 76. 7 | 75. 8 | 73. 4 | 0 |
| Speed (RPM) | 1784 | 1773 | 1759 | 1743 | 1726 | 1706 | 0 |
| Line Amperes | 10. 6 | 11. 8 | 13. 4 | 15. 8 | 18. 8 | 22 | 0 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA189056 | SA 35EE001Y989G1 | 1 EA |
| RA176775 | RA 35EE001Y989G1 | 1 EA |
| OC3040F09SP | CYL OIL CAP 40MFD/370V | 1 EA |
| EC1850A06SP | ELEC CAP 115V 2. 0 X 4. 3 X | 1 EA |
| WD3006A01 | RSS-2-103JT 2W 10K RES. METAL OXIDE 5% | 1 EA |
| NS2512A01 | INSULATOR, CONDUIT BOX X | 1 EA |
| 35CB3009 | 35 CB CASTING W/1. 09 DIA. LEAD HOLE @ 6: | 1 EA |
| 36GS1000SP | GASKET-CONDUIT BOX, . 06 THICK #SV-330 LE | 1 EA |
| 51XB1016A07 | 10-16 X 7/16 HXWSSLD SERTYB | 2 EA |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| 35EP3100M01 | FREP TEFC 203 BRG W/GRSR (RAISED FH PADS | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 2 EA |
| 35CB3801SP | CAPACITOR COVER, CAST | 1 EA |
| 34GS3002 | GASKET, CAPACITOR BOX | 1 EA |
| HA7010 | CAPACITOR RETENTION CLAMP | 1 EA |
| NS2501A02 | INSULATOR, CAPACITOR BOX | 1 EA |
| 51XB1016A08 | 10-16X 1/2HXWSSLD SERTYB | 2 EA |
| HW5100A03SP | WAVY WASHER (W1543-017) | 1 EA |
| 35EP3101A01SP | STD PU EP-ENCLOSED-205 BRG-W/GREASER | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| XY1032A02 | 10-32 HEX NUT DIRECTIONAL SERRATION | 4 EA |
| 51XB1214A16 | 12-14X1. 00 HXWSSLD SERTYB | 1 EA |
| 35FH4005A84SP | IEC FH W/GRSR, NO DIMPLES W/AUTOPHERETIC | 1 EA |
| 51XW1032A06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD S | 3 EA |
| 35CB4521GX | CONDUIT BOX LID KIT | 1 EA |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 4 EA |
| HW2501D13SP | KEY, 3/16 SQ X 1. 375 | 1 EA |
| HA7000A01 | KEY RETAINER 7/8' DIA SHAFT | 1 EA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB |
| MG1000G27 | PAINT- S9282E CHARCOAL GREY | 0. 017 GA |
| WD1000A15 | 3-520132-2 AMP FLAG (4M/RL NON-CANC/NON- | 4 EA |
| 35FN3002A05SP | EXFN, PLASTIC, 6. 376 OD, . 638 ID | 1 EA |
| HA3100A22 | THRUBOLT 10-32 X 10. 125 | 4 EA |
| HA4067A01 | PUSH IN DRAIN FITTING (BLACK) | 1 EA |
| HA4067A01 | PUSH IN DRAIN FITTING (BLACK) | 1 EA |
| LB5040 | INSTRUCTION TAG, AC & DC | 1 EA |
| SP5181A01 | MODEL 35 LC TORQ STAT SWITCH LEAD ASSY | 1 EA |
| LB1119 | WARNING LABEL | 1 EA |
| LB1125C01 | STD (STOCK) CARTON LABEL BALDOR WITH FLA | 1 EA |
| LC0001 | CONN LABEL TYPE L, 6 LEAD, DUAL VOLTS, R | 1 EA |
| NP1372L | ALUM UL CSA CE CC | 1 EA |
| 35PA1066 | PACKING GROUP COMBINED PRINT | 1 EA |
Accesories
| Product Number | Description | Multiplier |
|---|---|---|
| 35-8762 | C FACE KIT | A8 |
| 35EP1506A01SP | D-FLANGE KIT | A8 |
SKU: 25710
Exellent value, prizes
One of the best companies I have purchased equipment from. Low prices fast shipping. Best customer service.What else do I need.
Read moreSKU: 23169
Olha saves the day.. again.
I needed a great big motor, in a great big hurry, at a fair price, and Olha came through again. When I'm in the field, I do not have time to muck-around shopping for what I need - hoping that I get the part. It's imperative that I KNOW the part is coming. Prompt communications, and follow-up, is critical to my business, and Olha delivers.
Read moreSKU: 24486
Happy customer
Our customer only wanted to purchase this particular motors. I was pleased once again to not only find them in stock, but at the cheapest cost to resale.
Read moreSKU: 701029
Quality, fast shipping
This is a very professional supply company. They have excellent prices, fast deliveries and parts that you will not find any where else. i am glad I found them when I purchased a Baldor Motor, now I just purchased the cap.
Read moreBrand
Baldor
Model
L3514A
Brand
Baldor
Model
L3514T
Brand
Baldor
Model
L3514-50
Brand
Baldor
Model
L3514M
Brand
Baldor
Model
L3514T-50
Brand
Leeson
Model
110089.00
Brand
Baldor
Model
CL3514
Brand
Baldor
Model
FDL3514M
Brand
Leeson
Model
110910.00
Brand
Baldor
Model
PCL3514M
Brand
WEG
Model
00158ES1B56-S
Brand
Leeson
Model
F105
| Brand | Baldor |
| Model | EM3546-5 |
| Brand | Microcentric |
| Model | LDN-250 |
| Brand | AMI Bearings |
| Model | MUCNST210-30NPRF |
SKU: 25710
Exellent value, prizes
One of the best companies I have purchased equipment from. Low prices fast shipping. Best customer service.What else do I need.
Read moreSKU: 23169
Olha saves the day.. again.
I needed a great big motor, in a great big hurry, at a fair price, and Olha came through again. When I'm in the field, I do not have time to muck-around shopping for what I need - hoping that I get the part. It's imperative that I KNOW the part is coming. Prompt communications, and follow-up, is critical to my business, and Olha delivers.
Read moreSKU: 24486
Happy customer
Our customer only wanted to purchase this particular motors. I was pleased once again to not only find them in stock, but at the cheapest cost to resale.
Read moreSKU: 701029
Quality, fast shipping
This is a very professional supply company. They have excellent prices, fast deliveries and parts that you will not find any where else. i am glad I found them when I purchased a Baldor Motor, now I just purchased the cap.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/